Products
Contact Us
Tel:+86371-67105019
Fax:+86371-67105019
Email:shineabrasives@vip.163.com
Tube brush&abrasives ball brush
Tube honing brush
Application:suitable for internal hole face grinding, such as: cylinder, cylinder block, brake cylinder, pump, compressor, gun-barrel, fire-barrel, etc.
Effect:lower surface roughness, deburring, etc.
Abrasive: SIC, GC, Al2O3,B4C
Grain Size:120,150,180,220,240,280,320,360,400,500,600,800,1000#。
Application: honing, polishing, deburring
Sizes:total length: 140,150,200mm, length can be specially custom-made.
Diameters are as below:
Diameters of honing brush
7mm(.276") 19mm(3/4") 48mm(1 7/8")
8mm(.315") 20mm(.787") 51mm(2")
9mm(.354") 23.8mm(7/8") 54mm(2 1/8")
9.5mm(375") 23.8mm(15/16") 57mm(2 1/4")
10mm(.394") 25.4mm(1") 60mm(2 3/8")
11mm(.433") 29mm1 1/8") 64mm(2 1/2")
12mm(.472") 32mm(1 1/4") 67mm(2 5/8")
12.7mm(1/2") 35mm(1 3/8") 70mm(2 3/4")
14mm(.522") 38mm(1 1/2") 73mm(2 7/8")
16mm(5/8") 41mm(1 5/8") 76mm(3")
18mm(.709") 45mm(1 3/4")
Note: the diameters of the honing brush also can be specially custom-made.